Showing 37–45 of 99 results
-
-
Flame retardant esd lab coat
Details
Flame retardant esd lab coat
ECF: BASF (Resist 24DTEX)
Weave: 4Bar net (8mm diamond)
Weight/sqmt: 160
Composition: Flame retardant polyster (phosphorous compound based) 95% Conductive carbon yarn mixed warp knif fabric 5%
S/R: 10e5 ~ 10e6 ohms -
Flux Remover and Cleaning Solutions
Flux remover & PCB cleaner
Product Description
Flux Remover & PCB Cleaner for adding to Ultrasonic baths (5 ltr). It removes flux from soldering and deposits left from water damaged mobile phones etc. The cleaning process quickly and safely removes contaminants etc and will not damage, corrode or darken metal components. The cleaner is safe on brass, copper, aluminium and other metals.Directions:
The Flux remover & PCB cleaner fluid is a concentrate and is added to water at a ratio of 10: (1 parts cleaning fluid to 10 part water). For heavily soiled components, this can be strengthened to 7:1. The working temperature of the ultrasonic cleaner should be set between 50 – 80 degrees centigrade. After cleaning rinse all surfaces thoroughly with clean water.
Concentrate: 5 Ltr makes 50 Ltr of working solution.
Safe to use on most PCB’s
Deep cleans removing flux and contaminants without damage
Removes dirt & grease
Excellent stain remover
Good for removing thermal compound / pastes
Economical to use
For professional and amateur use
FREE UK DELIVERY -
Fume Extractors
Product overview
Breathe clean air without dangerous fumes and particles. Weller filtration systems are specially designed for continuous use in industrial work environments. The high quality HEPA H13 filters clean the air from hazardous vapors, particles and viruses. Therefore, recirculating the clean air back into the workplace ensuring a safe work environment. The small footprint design fits under the bench to free up the operator workspace. At only 53db or below, Weller Zero Smog filtration units keep the workplace quiet. -
Heel Grounder
– One Megohm resistor
– Two layers rubber grounder:
bottom layer toward floor, in blue dissipative rubber,
top layer toward shoes, in conductive black rubber. -
Heel Grounder With Buckle
– One Megohm resistor
-Two layers rubber grounder:
bottom layer toward floor, in blue dissipative rubber; top layer toward shoes, in conductive black rubber. -
HEPA / ULPE FILTERS
Final Filters
It is a high-efficiency air filter or HEPA Filter, ULPA Filter for filtering that requires excellent air quality. Used in industries that require extra cleanliness.
Produced to meet the needs of better air filtration efficiency than before. Final Filters are final filters. They are filters used in clean rooms and in conditions that require extra cleanliness, such as the electronics, semiconductor, pharmaceutical, food, hospitals, or even laboratories.
HEPA Filters, Ulpa Filters, or Final Filters can also prevent viruses. You will feel that the air in the room is clean and safe. HEPA Filters are air filters that have been tested for leaks using laser technology. Tested by the manufacturer, they are 99.99% efficient at particles of 0.3 microns up to 99.9995% at particles of 0.12 microns. Therefore, they are suitable for installation in your factories and establishments.
The HVAC system in the clean room provides a good working environment for production equipment by maintaining the cleanliness of the indoor air and stabilizing the temperature and humidity, which can reduce equipment failures, extend the service life of the equipment, and improve production efficiency and product quality. It also provides a comfortable working environment for operators. By adjusting the temperature and humidity appropriately and designing the air circulation system, the operator’s comfort can be reduced, and the work efficiency and work quality can be improved. -
Hot air rework stations
About this item
Hot Air Rework Station – Soft air design is specific for hot-sensitive SMD work or reflow soldering, the surrounding plastic parts will not be deformed. Inner overheat protector to avoid high temperatures damaging the SMD components and hot air gun. 8 speed of adjustable airflow and 3 air nozzles direct a concentrated heat flow to the work surface of small chips to large chips. High-quality brushless motor and turbofan combination, working noise are less than 45dB, let you focus on your jobs. -
Laminar Flow Hoods
Sterilization Cabinet – (Vertical Laminar Flow Clean Bench) 1.3 m wide
Sterile Cabinet
Overall Dimension : 1300 X 750 X 2000 mm
Working Dimension : 1200 X 645 X 610 mm
Display : Digital Air Flow
