Showing 64–72 of 99 results
-
These tables are perfect work stations for use in laboratories and industrial facilities. They are built for strength and durability, with both the frame and work surface made entirely from type 304 stainless steel. The work surface feaures a #4 finish and is 1″ thick. Adjustable bullet feet make leveling quick and simple.
Features
All stainless steel construction
16 gauge type 304, #4 finish work surface
2″ x 2″ square tubing legs
1.5″ x 1.5″ square tubing strechers
4″ weld-on rails on all four sides
4 Adjustable bullet feet
-
Material:
Each dust-sticking mat consists of several layers of PVC; each layer is attached with high-viscosity or low-viscosity coating layer, smooth and durable.
Features:
Multi-layer dust-sticking floor mat can effectively remove the dust carried by wheels and shoes, easy to keep clean. When the surface layer gets dirty, you can tear it and use the next new layer.
Sizes: 18″x36″, 24″x36″, 26″x45″
Packing: 30 layers/mat, 8 or 30 mats/carton
-
-
[Features]
· Excellent precision tip, suitable for work in environments sensitive to force, magnetism and rust
· The material is stainless steel (SUS304), which is non-magnetic
[Application]
· Holds a variety of small objects
-
10L Ultrasonic PCB Cleaner Motherboard Cleaning Machine
Model：K410HTD
Operating Mode: Digital Timer+Heater
Ultrasonic Power：240W
Frequency：40KHz
Volume: 10L
Tank Size：300x240x150MM
Timer: 1-99 Minutes
Heating Power: 300W
Voltage: AC 220-240V, 50Hz; AC 100-120V, 60Hz
This is a benchtop ultrasonic cleaner for electronics PCB board cleaning, it comes with a stainless steel cleaning basket, lid, power line
-
1. Energy-saving, lead-free application, meet with environmental protection requirement and user friendly designed
2. Automatic power system, inverter control, automatic board in-load feature.
3. Flux sprayer using transverse Japanese spray nozzle and driving by stepper motor, spray range is selective, PLC controlled, accurate and reliable.
4. Flux recovery container drawer design, easy to clean.
5. Conveyor equiped 3 width adjustable screws, the conveyor transmission is more stable, no PCB falling risk.
6. Titanium solder fingers, high strengthened double v-groove with tin resistant
7. PID close loop controlled hot air pre-heaters, preheating system uses three independent temperature control so as to ensure the excellent heat preservation, temperature uniformity, temperature accuracy in ±2ºC.
8. Pre-heat passage modular design, environmental protection and safety, convenient for cleanup.
9. Solder motor adopts imported high frequency conversion motor with independent control, stable performance.
8. Solder pot’s inpeller material is cast iron, never corrode, solder pot with oxidation jacket, low solder dross
11. Timer startup feature for solder pot, solder melted in within 90 minutes.
12. Automatic finger cleaner equipped.
13. With black box memory function, the machine can always store the SPC data, improve work efficiency.
14. Intelligent monitoring and alarm system ensure the stable performance and operators’ safety.
-
Color: anti-static PU leather, two colors (blue and black) are available.
Dimension: 430 x 400mm (chair seat); 400 x 300mm (chair back)
Height adjustable between about 480-620mm (supplied with 140mm adjustable pneumatic rod)
Surface resistance: 10° -10°2 or 101-10°2
System resistance: €10°Ω
Specification: plastic five-star-foot; high strength and durable nylon castor; conductive metal chain
-
Color: anti-static PU leather, two colors (blue and black) are available.
Dimension: 430 x 400mm (chair seat); 400 x 300mm (chair back)
Height adjustable between about 480-620mm (supplied with 140mm adjustable pneumatic rod)
Surface resistance: 10° ~ 10°2 or 101~10°2
System resistance: ≤10°0
Specification: carbon steel chroming five-star-foot; high strength and durable nylon castor;
conductive metal chain
